What is a Motorola DCX3200?

The Motorola DCX3200 is a high definition TV box capable of viewing HD channels, and capable of viewing 3D* content in MPEG4 format up to 1080p resolution. To view content in HD: Connect an HDMI cable between your TV and TV box for HD picture and audio (HDMI carries both picture and audio).

How do I fix my Motorola cable box?

Troubleshoot your unresponsive digital box by locating and unplugging the power cable. Wait 30 seconds and reconnect the power cable to the digital box. Wait approximately 1-2 minutes for the digital box to reboot. Power the digital box on and test if it is now responsive.

What is a DCX700?

The Motorola DCX700 is a cost-effective, High- Definition (HD) set-top with a single 1 GHz tuner that supports both MPEG-2 and MPEG-4 AVC services. The all-digital DCX700 includes the latest audio and video output interfaces, including HDMI™ and Dolby® Digital Plus.

How do I connect my HDMI cable to my set top box?

Use HDMI to Connect Your STB to Your HDTV

1. First, determine if your set-top box has an HDMI connection.
2. Locate one of the HDMI ports on your HDTV.
3. Attach one of end the HDMI cable to your HDTV and the other to your set-top box HDMI out.
4. Turn on your HDTV and STB.
5. Switch the input on your TV to the HDMI port you chose.

What is an Arris box used for?

The Arris Gateway TV box and Portal system provides you with the ability to view and record six HD channels at once, while watching up to five previously recorded shows, using the Gateway’s on-board tuners. A Portal is required for each TV you want to use to access these features.

How do I reset my Motorola DCX3200 m cable box?

Cold Reset Method

1. Remove the set-top from its packaging.
2. Plug in a serial connector to the DCX3200 and open a terminal window.
3. AC power cycle the set-top.
4. Once power has been applied to the DCX3200, quickly press and release the.
5. All the following lights on the front panel LEDS will illuminate: Power, Data, and.

How do you reset a Motorola cable box?

How to Reset a Motorola Digital Cable Box

1. Turn off the Motorola set-top box while leaving the TV turned on, then immediately press the “Menu” button on the remote.
2. Press the down arrow on the remote to scroll through the options until you reach the last one called “Restore all defaults.”

How do I turn on my Motorola DCX700?

Unplug the DCX700 set-top from the AC outlet, plug it back in, and then press the POWER button. If the DCX700 set-top is connected to a switched outlet on another unit, verify that unit is powered on. Unplug the power cord from the DCX700 set-top? s AC outlet, plug it back it in, and then press the POWER button.